how-to-unlock-samsung-by-code

How To Unlock Samsung By Unlock Code

Get Samsung Unlock Code

ENTER CODES IN SAMSUNG
if you are receiving “Code Error” With the provided Unlock codes or “Sim Network Unlock Unsuccessfully, DO NOT WORRY! proceed to the “Trouble Shooting” section on how to proceed. Make sure “Airplane Mode” and “Wi-Fi” is turned off under wireless connections if your Samsung is an Android device.

There are Multiple Unlock Codes Above, which One is it?
If you only received 1 Unlock Code, Don’t worry about this part, use the code provided above.Unlock Code is the Network=xxxxxxxx is the Unlock Code as shown below:
Example:
NETWORK =xxxxxxxx
PROVIDER =xxxxxxxx
SUBPROVIDER =xxxxxxxx
DEFREEZE =xxxxxxxx
EXTRA = xxxxxxxx
You can ignore the rest of the codes unless you are receiving a “Phone Freeze” message when trying to input the Unlock Code.

Code Input Instructions :

Get Samsung Unlock Code

Enter Unlock Codes on all Samsung Models Different phones have different Unlock Code Input Instructions, Try the following Instructions in Order:
Method #1
Insert a non accepted Sim card in your phone and power on. Once finished loading your phone will ask you to enter a code, enter the Unlock Code
Note: Non-Accepted Simcard is any sim card not from the original provider – USE SIM Security PIN Disables SIM

Method #2
Go to the dial screen on your phone as if you are going to make a call and press: #7465625638UNLOCKCODE# (8 digits unlock code)
Method #3
Go to the dial screen on your phone as if you are going to make a call and press: #0111UNLOCKCODE# (8 digits unlock code) Method #4 Go to the dial screen on your phone as if you are going to make a call and press #7465625638*# Once prompted for code, enter the 8 digits Unlock Code.
If Phone says, “Code Accepted” or “Network Unlock Successful” or “Not Yet Personalized” your phone is fully Unlocked

Check For Signal

If you are not receiving any signal after unlocking, make sure your wireless connections are turned on after unlocking the phone. Also, pull the battery and restart the phone.
Enter Defreeze Code for “Phone Freeze” Samsung Devices (only if your Samsung is Hard locked)
Method # 1

  1. Input a non-accepted sim card into the phone.
  2. Proceed to the dial screen.
  3. Enter the unfreeze code (Freeze code) and press enter, or okay.
  4. The screen should now ask for the unlock code (Network Code). Enter the 8 digits unlock code and hit enter.

Method # 2

  1. Turn the phone on with an unaccepted sim card
  2. The screen will display Phone is freeze / SOS
  3. Type the unfreeze code (Nothing will show on screen)
  4. Hit the Enter Button
  5. The phone will ask for the Network lock code
  6. Enter it as you have received it
  7. The phone will be unfreeze and unlocked

How do I know my Phone’s Network is Fully Unlocked?

Go to the dial screen on your phone, and press *#7465625#
A menu will be displayed that will resemble the following…

  1. [ ] Network lock
  2. [ ] Subset lock
  3. [ ] SP lock
    If everything is OFF, then your phone is fully unlocked.
    Trouble Shooting
    “Phone Freeze” Message What do I do?

Phone freeze is a result of the incorrect code being input incorrectly too many times, which means your Samsung device is Hard locked. You will require a defreeze code and a Network Code to Unlock your phone.
If you received multiple codes from us in the format below, use the Phone freeze instructions above.

Example:
NETWORK =xxxxxxxx
PROVIDER =xxxxxxxx
SUBPROVIDER =xxxxxxxx
DEFREEZE =xxxxxxxx
EXTRA =xxxxxxxx

If you received a Single code from us, you only have the network code. If you are receiving the “phone freeze” message, you will require a de-freeze code from one of the manufacturer methods. You can contact us directly regarding this.
“Code Error” or “Sim Network Unlock Unsuccessful” What do I do?
Please check your IMEI number by pressing *#06#, this is the most common reason the code doesn’t work. If the first 15 digits which appear is different from the 15 digit IMEI number provided above, please reply directly to this E-mail – support@fastunlocker.in
Otherwise try the following below:
Method #1 – (Samsung Galaxy S2, S3, Note , Note 2)

Follow these step carefully

as long as you have the correct code it will work 100% ( Your phone must be updated to the latest firmware!)

  1. Please troubleshoot as usual with the customer, the code must be correct and the phone MUST prompt for the code.
  2. If nothing we can proceed to use the “release method” on the phone(s):
  3. Go to the Dial pad and dial *#197328640#
  4. Please click on number [1] UMTS > [1] Debugging screen > [8] Phone Control > [6] NETWORK LOCK
  5. You will see 3 options
  6. Please click on number [1] Perso Sha256 INFO, the screen will change slightly
  7. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen
  8. Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message
  9. Restart the phone on the screen by holding the power button and click RESTART
  10. When the phone prompts for the unlock code simply enter the unlock code
  11. Your phone is now permanently unlocked!

(Below For Samsung Galaxy S4 Only)

Method #1
Follow these step carefully, as long as you have the correct code it will work 100% ( Your phone must be updated to the latest firmware!)

  1. Make sure that the phone PROMPTS for the code with a NON accepted sim card and that your IMEI is correct by dialing *#06#
  2. Go to the Dial pad and dial *#0011#
  3. Please click your MENU button (Bottom LEFT button) and click BACK on the menu that appears, Nothing will happen do not worry please move to the next step
  4. Please click your MENU button AGAIN and this time click KEY INPUT
  5. When the Key input box appears please input the number “1” and hit OK
  6. You will see a number 1 for a while, please wait until it changes into the SERVICE MENU
  7. Please click [1] UMTS > [1] DEBUGGING SCREEN > [6] Phone Control > [6] Network LOCK
  8. You will see 3 OPTIONS within Network LOCK
  9. Please click on number [1] Perso Sha256 INFO, the screen will change slightly
  10. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen
  11. Next Please click on number [2] Perso Sha256 ON, the screen will change again to a one-line message
  12. Restart the phone on the screen by holding the power button and click RESTART
  13. When the phone prompts for the unlock code simply enter the unlock code provided to you
  14. Your phone is now permanently unlocked!

IF The Above Method Not Working – Follow This

Method #2
Follow these step carefully, as long as you have the correct code it will work 100%

  1. Power off and on your phone with different network sim card. “SIM network unlock PIN” or “Enter Network Lock Control Key” screen will appear.
  2. Type your Unfreeze code (MCK code) and hit Unlock button. You will get “unsuccessful message” again but don’t worry.
  3. Now type the Unlock code (Network or NCK code) and hit Unlock button.
    If the phone says “Network Lock Successful” it worked, but if not, proceed to step 4.
  4. If you get “unsuccessful” again then hit Dismiss button and type 27673855# on phone keypad. (CAUTION! This will reformat all your data!)
  5. After phone restarts, type the Unfreeze code (MCK code) when prompted to enter “SIM network unlock PIN” or “Enter Network Lock Control Key” screen and hit unlock button.
    It will say “unsuccessful” again, don’t worry!
  6. Type the Unlock code (Network or NCK code) and hit Unlock button.
  7. Your phone should now give you the message “Network Lock Successful”
  8. Now your phone is successfully unlocked!

If this is not working, go to
Method #3

  1. Turn off the Wi-Fi on your phone and then turn the device ON without SIM card.
    Once it’s on go to phone dial screen and DIAL: 7465625638*#
    it will bring you to the NETWORK LOCK screen.
  • in MCC/MNC field enter code for the service provider, your phone is originally from (eg 31026 for T-Mobile USA)
    Check here for list of codes
    *If your network has more than one MCC/MNC please try all of them this is very important
  • in CONTROL KEY field enter the UNLOCK code
  • hit OK
  • you should get a message: LOCK SUCCESSFUL
    Power phone down, insert SIM card you want your phone to work with and power on.

I can make Calls and Text but I’m not getting Internet Service.

In this case, you will need to adjust what’s called the APN settings.The APN settings vary depending on the service provider you are trying to use. Please contact your service provider and they can assist you in setting this up. There is no separate unlock for data or internet. If you can call or text, your phone’s network is fully unlocked.
My Phone is asking for the “PUK” or “Security Pin” or “Password”

If your phone is asking for one of the above, it is the Simcard personal password or phone security password NOT the Network Lock which we provide for you.You can contact your service provider for this. Once you bypass this, you can use the Network Unlock Code provided by us.

My Phone seems to be unlocked but I’m not getting any signal

First of all, we do request you contact the service provider to make sure after unlocking your device, your unlocked phone will be compatible with their network. Not all GSM phones are compatible with any Network after unlocking it. The unlocked phone must be able to support the Network’s Frequency. If you are unsure of this, please contact them regarding this. After unlocking your phone, please pull the battery for a couple of minutes and then restart the device. It may take a few minutes for your phone to pick up the new signal. Also, go to your Network settings on your phone, and make sure the device can detect the signal from the Sim card you are trying use.

Alternative Code Input Instructions:

Follow these step carefully, as long as you have the correct code it will work 100%

  1. Power off and on your phone with different network sim card. “SIM network unlocks PIN” or “Enter Network Lock Control Key” screen will appear.
  2. Type your Unfreeze code (MCK code) and hit Unlock button. You will get “unsuccessful message” again but don’t worry.
  3. Type the Unlock code (Network or NCK code) and hit Unlock button.
  4. If you get “unsuccessful” again then hit Dismiss button and type
    27673855# (CAUTION! This will reformat all your data!)
    on phone keypad. Now, wait until the phone is restarted. This operation will erase all data on your phone!
  5. Now type the Unfreeze code (MCK code) when prompted to enter “SIM network unlock PIN” or “Enter Network Lock Control Key” screen and hit unlock button. It will say “unsuccessful” again, don’t worry!
  6. Type the Unlock code (Network or NCK code) and hit Unlock button.
  7. Your phone now give you the message “Network Lock Successful”
    Now your phone is successfully unlocked!

Enter Unlock Codes on an AT&T / Cingular Black Jack

Get Samsung Unlock Code

METHOD # 1

  1. Insert NON-Cingular / AT&T SIM into the device
  2. Power on the device – Wait approximately 30 seconds until the Sim Lock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)
  3. Enter the unlock code in the blank field
  4. Press Ok – If the unlock code is incorrect, an error dialogue will appear. After pressing Ok on this dialogue, the user has to re-enter the unlock code after delays (see above in Device Specific Information) – If the unlock code is correct, a success dialogue will appear.
  5. Press Ok – The device is now unlocked and should continue booting

METHOD # 2
1.Insert disallowed sim card (a Sim card that the phone does not usually accept) and enter unlock codes when prompted
2.NOTE: If you are unable to connect to the service provider or unable to make outgoing calls or receive messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:
Power on your Phone
Enter #1546792#
Select Option 3 Network & Call Settings
Select option 5 Network Mode
Select GSM

Without sim alternative i607 / Blackjack:

1- Power on without sim, you will then get a message saying “SIM Failure” at the top of the screen.
2- Click “Done” then press the green button to get into the dial pad.
3- Type in #7465625638 Then it will display “Enter Network Control Key”
4- enter the 8 digits unlock code. Then click ok – Your phone is now unlocked

Samsung Unlock Code Instructions:

Model : Samsung U900(soul), F480, F490, J700, Z105, Z107, T919, T929
Unlock code is composed like this: #7465625638CODE#

  1. Press the # button on the keypad 1 time to display #
  2. Type 7465625
  3. Press the star () button on the keypad 1 time
  4. Type 638
  5. Press the star () button on the keypad 1 time
  6. Now type in CODE2 we sent you ( If the phone is still locked with CODE2 try CODE1 )
  7. Press the # button on the keypad 1 time
  8. phone is unlocked!

Model : Samsung i900 Omnia

  1. Insert a Sim card from a different network.
  2. Power ON handset (Make sure wireless mode is ON)
  3. When asked for code, enter Code 2
  4. Now phone should be unlocked
  5. If Code 2 not working, try again with Code 1.

Model : Samsung J600

Unlock code is composed like this: #0149MCK# or #0111NCK#

  1. Press the # button on the keypad 1 time to display #
  2. Type the 4 digit code which corresponds to your lock type (in most cases the MCK code will work with code:1)
  3. Press the star (*) button on the keypad 1 time
  4. Type your unlock code which corresponds to your lock type
  5. Press the # button on the keypad 1 time
  6. phone should now be unlocked
    7, If the phone is still locked, you have a 2nd lock activated so please check locks and enter 2nd code

Model : Samsung Z320i, Z510i, Z650i

Unlock code is composed like this: **CODE#

  1. Switch ON your phone with a not Accepted SIM Card
  2. Compose **CODE#

Model : Samsung i560

Unlock code is composed like this: #pw+CODE+1#

  1. Press the # button on the keypad 1 time to display #
  2. Press the star () button on the keypad 3 times quickly to display p
  3. Press the star () button on the keypad 4 times quickly to display w
  4. Press the star () button on the keypad 2 times quickly to display +
  5. Now type in the 15 digit CODE we sent you via email
  6. Now press the star () button on the keypad 2 times quickly to display +
  7. Press number 1 on the keypad 1 time
  8. Press the # button on the keypad 1 time
  9. phone is unlocked!

All other Samsung

1 – Switch ON your phone with a not Accepted SIM Card,
2 – Phone will ask for “Password”,
3 – You can now enter the Unlock Code we send to you.

if phone show “Insert Correct SIM Card”

1 – Switch ON your phone with a not Accepted SIM Card,
2 – Compose : #0111CODE#
“PHONE FREEZE: SIM Unavailable”:
If your phone displays this message or similar when inserting an incorrect sim, you must obtain the Defreeze code from us and do the following:

  1. Power on phone with the wrong sim inside so phone displays “Phone Freeze, SIM unavailable. Please contact service provider”
  2. Now type CODE1 (de-freeze code) that we supplied you and press “OK”, “Confirm” or the center button (no digits will be seen on display when entering this code)
  3. Now phone will ask you for Network Code, so enter CODE2 (unlock code) and press OK.
  4. If nothing happens when you enter CODE2, you will need to compose code like this: #7465625638CODE2#
  5. Now your phone should be unlocked.
    If the phone does not accept CODE2, and still have no luck with #7465625
    638*CODE2# please try step 4 using CODE1

Unlock Instruction for FIDO Samsung i616 Jack:

  1. Power ON your phone with a FIDO SIM Card that the phone is locked to
  2. Type #7465625638
  3. Network Lock Screen appears, enter UNLOCK CODE
  4. Device is now unlocked

Enter Unlock Codes on Samsung Z105 and Z107:

1- Switch ON your phone with a not accepted SIM card
2- Compose: #7465625638YOURCODE# (by “your code” I mean the unlock code we gave you)

Enter Unlock Codes on Samsung Z510 and Z320i:

1- Switch ON your phone without SIM Card
2- Compose: **YOURCODE# (by “your code” I mean the unlock code we gave you)

Enter Unlock Codes on Samsung 3G, Zxxx & Dxxx, A707, Series:

1- Switch ON your phone without SIM Card.
2- Compose : #7465625638YOURCODE# (or #7465625638*CODE#) (by “yourcode” I mean the unlock code we gave you)

Enter Unlock Codes on Samsung (all other models):

Get Samsung Unlock Code

Method #1
1- Switch ON your phone with a not Accepted SIM card
2- Phone will ask for the “Password”
3- You can now enter the unlock code

Method #2
1- Switch ON your phone without a SIM card (if this doesn’t work try with a non-accepted sim card first and if necessary an accepted sim card)
2- Compose: #0111*YOURCODE# (by “yourcode” I mean the unlock code we gave you)
To solve “Phone Freeze” or “Return for service problem”
Insert other operators SimCard.
Enter “freeze” Code(it will not be visible) and accept with OK key
(if you purchased our Samsung manufacturer method, then the “freeze”
the code is the 2nd code, 1st code is the unlock code)

Method #3

  1. Turn phone on with an unaccepted sim card
  2. Screen will display “Phone is freeze / SOS”
  3. Type the unfreeze code (Nothing will show on screen)
  4. Hit the “Enter Button” as shown in picture below
  5. The phone will ask for the Network lock code
  6. Enter it as you have received it (or as your unlock software is showing you)
  7. Phone will be unfreeze and unlocked

Leave a Comment